ACelSHOP - Columbus TS40 & TS41 Pneumatic Time Delay Switch (1 Pole)
Description
The Original TS40 (Single pole) Columbus series is suitable for controlling LEDs, incandescent (GLS), fluorescent and compact fluorescent lighting. The timer can be used on its own, or with other units in a 2-wire (no neutral) lighting circuit, and can therefore be installed on new installations or replace existing single gang switches.
Operation
The switch is operated by pressing the plunger button. This will “make” or “break” the change-over contacts. The plunger will gradually return to its original position during the time delay sequence, eventually returning the change-over contacts to their original position using the snap action of the switch. The face-plate is moulded in a semi-translucent material and therefore it is normal to occasionally see a flash when the contacts “make” or “break”.
Installation Instructions
Included in the box. All wiring should be carried out by a qualified Electrician in accordance with the current regulations.
Applications
Stairwells, Corridors, Basement, Storeroom, Toilets, Laundry/Drying Room, Lift Room.
Kit Contents
x1 Light Switch.
Material
ABS V0.
Colour
White.
Technical Data
| For LED Lighting Load | 10A/250V |
|---|---|
| For Incandescent Lighting Load | 10A/250V |
| For Fluorescent Load | 6A/250V |
| For Compact Fluorescent Lighting Load | 3A/250V |
| Compatible | With 16 mm deep single gang BS accessory plate |
| IP Rating | IP20 |
| Dimension (mm) | 37(h)x86(w)x86(d) |
| Colour | White RAL 9010 |
| Power Dissipation | < 0,8 w |
| Temperature | 0°C - +50°C |
| Air Humidity | 5% - 95% RH |
| Terminals | 2 x 2,5 mm² |
| Accuracy | +/- 5-10% |
Size Chart
| Product | No.per Pack | Type | Time Delay | Mounting |
|---|---|---|---|---|
| TS40 (No Neon) | x1 | 1 pole, 2 wire | > 10 min | 20mm & 25mm deep boxes |
| TS41 (Neon) | x1 | 1 pole, 2 wire | > 10 min | 20mm & 25mm deep boxes |